HomeHome > FPV Equipment > 5.8G VTx

Atlatl HV micro

Item Code:
13012
Sold: 37
5.8G FPV Video Transmitter,Standard 20mm square to center of holes,Dimensions: 30x26mm,Weight: 3.6g.
Unit Price:
USD $21.00
Price:
USD
$21.00
Shipping Cost:
to
Delivery:
Estimated between
PC
494 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service

Features

  • Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.

  • Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.

  • SmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.

  • All parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.

  • MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.

  • LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.

  • Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.

  • 0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.

  • Built in microphone, so you can listen to your motors while you fly, no matter how far away you fly.

  • Standard 26mm form factor allows you to mount the Atlatl directly on your flight controller stack.


Specifications
  • Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
  • Audio: 6.5 MHz Mono
  • Antenna Connector: MMCX
  • Input Voltage: 7 to 28 volts (2-6S LiPo)
  • Dimensions: 30x26x7mm
  • Mounting Holes: Standard 20mm square to center of holes 
  • Weight: 3.6g

Package Includes:
VTx Board *1
80mm SMA--MMCX Cable *1
60mm Antenna *1
150mm 4pin JST GH wire *1


Manual:

Holybro_Atlatl_HV_micro_Manual.pdf
Average rating:

Maybe You Also Like...
Kopis mini_3inch(free shipping)
KOPIS is a high-performance ready-to-fly FPV racing drone from Holybro,
$179.00
X500 Kit
X500 Frame full carbon fiber twill,ARM diamete16mm, It is  perfectly compatible with the Holybro Pixhawk4 and Pixhawk4 Mini kits.The kit is easy to assemble.No soldering needed.
$425.00
X500 Frame Kit
Perfectly compatible with the Pixhawk4 set&Pixhawk4 mini set.
$86.00
Kopis2 6S V2(free shipping)
On Holybro Kopis 6S V2, the ESC installation direction has been changed while the power supply cord has been moved from the side of the quad to the tail, which will better protect the ESC. Kopis 6S V2 is equipped with a 1200TVL Foxeer Micro Razer FPV cam
$299.00
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 45A ESC Combo
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
$125.00
Kakute F7 V1.5 &Tekko 32 F3 4in1 45A esc  Combo
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
$100.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
Kakute F4 V2 & Tekko32 F3 4in1 45A ESC STACK
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
$86.00
Kakute F7 V1.5 Stack
IMU updated to MPU6000,Re-designed and more reliable damping structure
$69.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00