HomeHome > FPV Equipment > 5.8G VTx

Atlatl HV V2

Item Code:
13008
5.8G FPV Video Transmitter
Unit Price:
USD $25.00
Price:
USD
$25.00
Shipping Cost:
to
PC
181 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service

Features

  • Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.

  • Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.

  • SmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.

  • All parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.

  • MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.

  • LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.

  • Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.

  • 0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.

  • Built in microphone, so you can listen to your motors while you fly, no matter how far away you fly.

  • Standard 36mm form factor allows you to mount the Atlatl directly on your flight controller stack.

Specifications

  • Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
  • Audio: 6.5 MHz Mono
  • Protocol:smart audio2.0
  • Antenna Connector: MMCX
  • Input Voltage: 7 to 28 volts (2-6S LiPo) with absolute maximum 42 volts
  • Dimensions: 35x25x7mm (Includes USB height)
  • Mounting Holes: Standard 30.5mm square to center of holes 
  • Weight: 9.3g

Package Includes:

VTx Board *1
80mm SMA--MMCX Cable *1
150mm 4pin JST GH wire *1

Manual:

Holybro-Atlatl-HV-v2-Manual

Download:

ATLATL HV V2-VTx table
Maybe You Also Like...
Spare Parts-Kopis cinewhoop 2.5inch
NEW
Applicable for Kopis cinewhoop 2.5inch(SKU30076,30077)
$8.00
Kopis cinewhoop_2.5inch(free shipping)
NEW
Nebula Pro Vista Kit 720p/120fps low latency HD digital FPV system / T-Motor: F1404 KV3800 / GEMFAN D63-5B / Take-off Weight:248g
$144.00
Tekko32 F3 4IN1 Mini 35A ESC(35A)
NEW
BLHELI32 / F3 MCU/4x 35A/20x20mm
$43.00
H-RTK F9P GNSS Series
NEW
Differential high-precision multi-band GNSS positioning system series. UBLOX F9P module
$378.00
H-RTK M8P GNSS Series
NEW
H-RTK M8P is the latest differential high-precision GNSS positioning system from Holybro. It uses a UBLOX M8P module.
$199.00
Pix32 v5
HolyBro Pix32 v5 is a new flight controller we have developed on the base of FMUv5 scheme, which can be regarded as a variant version of ‘Pixhawk4’.
$143.00
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module.
$92.00
KakuteF7 HDV AIO
Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module.
$42.00