HomeHome > FPV Racing Drones

DJI Digital FPV System

Item Code:
520054,31027,31028,20083,20084
DJI has redefined the drone racing industry with the new Digital FPV System. It delivers lower latency rates within 28 ms, a 4km maximum transmission range, stunning HD 720p/120fps resolution, and, most importantly, an unforgettable FPV flying experience.
Unit Price:
USD $179.00
Price:
USD
$179.00
  • Optional items:
    DJI FPV Air Unit DJI FPV Goggles DJI FPV Remote Controller (Mode 1) DJI FPV Remote Controller (Mode 2) DJI FPV Air Unit+DJI FPV Goggles+DJI FPV Remote Controller (Mode 1) DJI FPV Air Unit+DJI FPV Goggles+DJI FPV Remote Controller (Mode 2)
Shipping Cost:
to
Delivery:
Estimated between
PC
23 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service

Overview

[1] 4km maximum transmission distance; FCC: 4 km, CE: 0.7 km, SRRC: 4 km. Unobstructed, free of interference, when FCC compliant. Maximum flight range specification is a proxy for radio link strength and resilience. Always fly your drone within visual line of sight unless otherwise permitted. 
[2] Latency rate under 28 ms at 720p/120fps and under 40 ms at 720p/60fps. 
[3] There are up to eight channels for DJI FPV Goggles depending on the region (FCC: 8, CE/SRRC: 4, MIC: 3). Each channel has a bandwidth of 20 MHz. The default channel is eight and only one pilot at a time is allowed to use this channel. Channel eight can be changed manually to avoid interference from other devices. All channels operate under a 5.8 GHz frequency.
[4] The DJI FPV Air Unit can also record in 720p/120fps (without audio).
[5] 7ms low latency between the DJI FPV RC and DJI FPV Air Unit can only be achieved under ideal conditions. Latency rates are not consistent.
[6] 4-in-1 integrated software for the DJI FPV RC reduces operational errors and allows users to change settings remotely.
[7] Users must remove the microSD card from their DJI FPV Air Unit and insert it in their DJI FPV Goggles to watch recorded videos.
[8] Omnidirectional antennas are only compatible with other antennas that are left-hand circular polarized.
[9] Custom-made myopia lenses are only compatible with DJI FPV Goggles and will be sold at the DJI Online Store.
[10] The end-to-end latency is the total time from camera input to screen display. DJI FPV Goggles can reach a maximum transmission distance (FCC) in a wide-open area with no electromagnetic interference, achieving minimum latency in Low Latency mode (720p/120fps).
Maybe You Also Like...
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$92.00
KakuteF7 HDV AIO
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$42.00
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$49.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00
Pixhawk 4 GPS Module
SALE
Pixhawk 4 GPS Module with JST GH 10 Pin connector for Pixhawk 4 "GPS Module" input port
$42.00 $42.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Pix32"Pixhawk" Flight Controller
This board is based on the Pixhawk project FMUv2 open hardware design. It is also know as Pixhawk 2,with hardware version px4 2.4.6.
$129.00