HomeHome > Video Link > DJI

DJI Digital FPV System

Item Code:
520054,31026,31027,31028,20083,20084
DJI has redefined the drone racing industry with the new Digital FPV System. It delivers lower latency rates within 28 ms, a 4km maximum transmission range, stunning HD 720p/120fps resolution, and, most importantly, an unforgettable FPV flying experience.
Unit Price:
USD $179.00
Price:
USD
$179.00
Shipping Cost:
to
Delivery:
Estimated between
PC
30 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service

DJI FPV Air Unit

Overview

The FPV Air Unit features an ultra-low-latency high-definition digital image transmission, 1080p/60fps video recording, and eight frequency channels, allowing eight pilots to fly simultaneously.

Tips

The air unit may become hot during or after operation.
DO NOT touch the air unit before it cools down.
DO NOT use the air unit for an extended period when there is no external cooling equipment. Otherwise, the air unit may overheat and enter overheat protection mode. 
Keep the antennas of the air unit at least 40 mm apart.
Keep the air unit away from metal objects or carbon fiber frames. Make sure to choose a position where the transmission will not be blocked during flight.

In The Box

DJI FPV Air Unit (with camera and four M2 screws) × 1
Three-in-one cable × 1
Antenna (MMCX elbow) × 2

Specifications

Weight
Air Unit (Camera included): 45.8 g
3.9 g (MMCX elbow each)
Dimensions
Air Unit: 44 × 37.8 × 14.4 mm
Camera: 27.4 × 21.1 × 20.1 mm
Coaxial Cable: 100 mm
Operating Frequency: 5.725-5.850 GHz
Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm
Min. Latency (end-to-end)
Low Latency Mode (720p/120fps): <28 ms
High-Quality Mode (720p/60fps): <40 ms
Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km
Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)
I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Input Power: 7.4-17.6 V, about 4-9 W
Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M
Lens: 2.1 mm, f/2.1
Shutter: Rolling shutter
ISO: 100-25600
FOV: 150°(D); 122°(H); 93°(V)
Dimension: 22.1 × 21.1 × 20.1 mm
Weight: 8.2 g

Channels: 8
Channels Info
FCC
Channel 1: 5660
Channel 2: 5695
Channel 3: 5735
Channel 4: 5770
Channel 5: 5805
Channel 6: 5878
Channel 7: 5914
Channel 8: 5839

CE/SRRC
Channel 1: 5735
Channel 2: 5770
Channel 3: 5805
Channel 8: 5839

MIC
Channel 1: 5660
Channel 2: 5700
Channel 8: 5745

 


 

DJI FPV Goggles V2

Overview

High definition, low latency, long-distance transmission, and long-distance transmission. Battery in the box supports 110 minutes of flight when fully charged.

Tips

Avoid exposing the inside of the goggles to direct sunlight.

In The Box

DJI FPV Goggles V2 (inc. foam padding) × 1

DJI FPV Goggles Battery × 1

DJI FPV Goggles Power Cable (USB-C) × 1

DJI FPV Goggles Antenna (Dual Band) × 4

Headband × 1

USB-C cable × 1

Sleeve × 1

Specifications

DJI FPV Goggles V2

Weight: Approx. 420 g (headband and antennas included)

Dimensions: 202×126×110 mm (antennas included), 184×122×110 mm (antennas excluded)

Screen Size: 2-inch × 2

Screen Resolution (Single Screen): 1440 × 810

Screen Renew Rate: 144 Hz

Communication Frequency: 2.400 - 2.4835 GHz*; 5.725-5.850 GHz

*Only supports 5.8Ghz when used with DJI FPV Air Unit

Transmitter Power (EIRP): 2.400 - 2.4835 GHz

FCC/MIC: ≤28.5 dBm; CE: ≤20 dBm; SRRC: ≤20 dBm; MIC: ≤20 dBm

5.725-5.850 GHz

FCC/MIC: ≤31.5 dBm; CE: ≤14 dBm; SRRC: ≤19 dBm

Live View Mode: Low-Latency Mode (810p 120fps); High-Quality Mode (810p 60fps)

Video Format: MP4 (Video format: H.264)

Supported Video Play Format: MP4, MOV, MKV (Video format: H.264; Audio format: AAC-LC, AAC-HE, AC-3, MP3)

Operating Temperature: 32° to 104° F (0° to 40° C)

FOV: Adjustable from 30° to 54°. Adjustable image size from 50%-100%

Interpupillar Distance Range: 58 -70 mm

Supported Storage Card: microSD cards with storage capacities of up to 256GB.

 

DJI FPV Goggles Battery

Capacity: 1800 mAh

Voltage: 9 V (Max.)

Type: LiPo 2S

Charging Temperature: 0℃ to 45℃

Energy: 18 Wh

Max Charging Power: 10 W

Battery Life: Approx. 110 minutes (measured in an environment of 25°C at maximum brightness level)

 

*Only supports 5.8Ghz when used with DJI FPV Air Unit

 


DJI FPV Remote Controller

Overview

With the DJI FPV Remote Controller, parameters of each component can be adjusted remotely. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver. Users can also enjoy 7ms ultra-low latency between the remote controller and the air unit.

Tips

It is recommended to use the USB adapter of DJI Goggles RE, Ronin-S, Spark or an FCC/CE certified USB adapter that supports Quick Charge 2.0.
If you use the DJI FPV Goggles and the DJI FPV Remote Controller at the same time, you must first link the air unit and the goggles, and then link the remote controller.

In The Box

DJI FPV Remote Controller (including the battery) × 1

Specifications

Remote Controller 
Weight: 765 g
Operation Frequency: 5.725-5.850 GHz
Max. Transmission Distance (Unobstructed,free of interference): FCC/SRRC: 4 km; CE: 0.7 km
Transmitter Power (EIRP): FCC: <30 dBm; CE: <14dBm; SRRC:<19dBm
Operation Current/Voltage: 0.6 A @ 7.6 V
Operation Temperature: 0° to 40°C (32° to 104°F)
Charging Temperature: 5° to 40°C (41° to 104°F)

Remote Controller Intelligent Battery 
Battery Type: LiPo 2S
Capacity: 4920 mAh
Voltage: 7.6 V
Energy: 37.39 Wh

Maybe You Also Like...
Spare Parts-Kopis cinewhoop 2.5inch
NEW
Applicable for Kopis cinewhoop 2.5inch(SKU30076,30077)
$8.00
Kopis cinewhoop_2.5inch(free shipping)
NEW
Nebula Pro Vista Kit 720p/120fps low latency HD digital FPV system / T-Motor: F1404 KV3800 / GEMFAN D63-5B / Take-off Weight:248g
$144.00
Tekko32 F3 4IN1 Mini 35A ESC(35A)
NEW
BLHELI32 / F3 MCU/4x 35A/20x20mm
$43.00
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module.
$92.00
KakuteF7 HDV AIO
Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module.
$42.00
X500 Kit
X500 Frame full carbon fiber twill,ARM diamete16mm, It is  perfectly compatible with the Holybro Pixhawk4 and Pixhawk4 Mini kits.The kit is easy to assemble.No soldering needed.
$425.00
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$49.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00