Etlas Mobile II

Item Code:
Unit Price:
USD $1,200.00
Shipping Cost:
  • Product Details
  • Write a Comment(0)
  • After-sales Service

Etlas Mobile II

Product Description

  • All-in-one: Radio link, RC link, and video link integrated;
  • Powerful video transmission link, up to 1080p@60fps VTX supported;
  • Built-in 5.5 inches LCD touchscreen with 1000nit and 1080p resolution;
  • Includes QGC software;
  • Support secondary development, with Android SDK provided;
  • Up to 20km transmission distance(ideal environment);
  • Low latency down to 110 ms, from HDMI-in to display;
  • Up to 13 control channels, with customize bottom and assigned SBUS value;
  • 5.8GHz Wi-Fi Supported
  • Compatible with Ardupilot and PX4 firmware;
  • Supported video type: HDMI*1 and Ethernet*1;
  • Support USB / WIFI cast screen;
  • External batteries, 2*18650 detachable batteries;

Hardware Spec.

  • Memory: Sky-Side LPDDR3 1GB, ground-end LPDDR3 2GB
  • Sky-Side/Ground-end EMMC: 4GB
  • VTX Distance: FCC 20km CE/SRRC/MIC 12km
  • VTX Latency: Down to 110 ms
  • VTX Resolution: 720p@30fps, 1080p@30/60fps
  • Frequency: 2.4GHz ISM
  • Receiving Sensitivity: -99dBm@20MHz BW
  • Interference Recovery: less than 1sec


  • Screen: 5.5 inches LCD touchscreen with 1000nit and 1080p resolution
  • Built-in QGC software
  • WIFI: 5.8GHz supported
  • Channels: Equipped with 13 channels: 2*joysticks, 3*scroll wheels, 2*three-gear switches, and 4*bottoms
  • 4G and Bluetooth: Built-in worldwide 4G module and Bluetooth module
  • Built-in speaker and microphone
  • External Connector: USB Type-C for charging/debugging/transfer files/HDMI-out(Type-c to HDMI adapter required)
  • Battery: External batteries, 2*18650 detachable batteries Spec:INR18650-35E/3450mA/4.2V/Positive Shape Tip/Samsung
  • Built-in GPS, Gyro, compass, Barometer
  • Antenna: 1*Omnidirectional antenna, 1*Directional antenna, MINI BNC connector, detachable

Frame: Aluminum
Weight: 104g
Size: 76.5*76.5*21.4mm
Signal Frequency: 20MHz/10MHz
Power Consumption: Average power consumption on one side less than 4W
HDMI: External video signal input(Priority)
4PIN Ethernet: Ethernet video signal input
Power Connector: Powering range DC 12-24V, XT30 connector
UART connector: 3.3V / 5V Electric Level UART connector
Sbus Connector: Two-way RC output, S.bus1and S.bus2
Micro USB: For debugging and upgrade, OTG mode supported
Press Hole: For pairing and reset indicator
Indicator: To indicate pairing, VTX status, and video input status
MCX Antenna port: To transfer data signal to ground-end

Packing List

Etlas Mobile II*1
MINI BNC omni antenna *1
MINI BNC omni antenna*1
Sky/drone end unit*1
MCX-to-SMA feeder*2
2.4G antenna*2
18650 battery*2
Packing box for antenna*1
Packing foam*2
6PIN JST cable*1
4PIN JST cable*1
3PIN JST-to-Dupont cable*2
20PIN HD cable*1
20PIN-to-HD adapter*1
TypeC USB cable*1
User manual*1


1. Choose 5V/2A or 9V/2A charging adapter. 9V/2A can be used for fast charging.
2. For long-term storage, please unplug the battery and store it in a cool and dry place.
3. Please set the channel and the joystick mode before take-off. Do not change those setting during flight for safety.
4. The power input of the sky-side is DC 12-24V, and the power supply should be within this range(12-24V), otherwise it might burn out the image transmission.
5. The Etlas Mobile II only supports 5.8G WIFI frequency, 2.4G WIFI frequency cannot be connected and searched. Please use 5.8G WIFI to use the network.


Etlas Mobile II Manual