HomeHome > Flight Controllers > Kakute

Kakute F4 AIO V2 & ATLATL HV & Tekko32 35A ESC * 4 Combo

Item Code:
20029
Sold: 7
Kakute F4 AIO V2 & ATLATL HV & Tekko32 35A ESC * 4 Combo
Unit Price:
USD $123.00
Price:
USD
$123.00
Shipping Cost:
to
Delivery:
Estimated between
PC
1 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service
Tekko32 35A ESC

Tekko32 is the latest BLHeli32 ESC from HolyBro Hobby, premium class product
The Tekko32 ESC runs in conjunction with an ARM 32bit compatible MCU. It can run input signals with lower latency, at faster rates, smooths out the RPM band, is capable of both voltage and current monitoring and limiting, as well as offering customization of the brake on stop force. Unlike current ESCs, the Tekko32 ESC has A LOT of room to grow and wide compatibility range with future products.
One of the nicest features with the Tekko32 35A ESC is the auto timing feature, which (essentially) is designed to offer the pilot the smoothest and most efficient flight experience available, which is a freestyle pilots dream come true!
what can the increased MCU speed do?
First of all, it can run input signals with lower latency at faster rates.
Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.
Secondly it allows packing of more functionality.
- Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.
- Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.
- Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.
- Like programmable brake on stop force. Which allows control of the braking of fixed wing props.
- Like improved direction change in bidirectional mode.
- Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.

 
Features:
·       32bit Compatible ESC (Blheli_32)
·       Dshot1200 up to 32kHz
·       Incredibly small size
·       Very low weight
·       Auto Timing Feature
·       On-Board RGB LED
·       Build in Current sensor
·       Smooth Response
·       Compatible to BetaflightF3/F4 Flight Controller

 
Spec:
·       2-6s LIPO input
·       35A designed
·       Size: 15*30mm
·       Weight: 5.2g

 
Some Tips:
·       BLHeli_32 ESC Firmware Overview(https://oscarliang.com/blheli-32-overview/)
·       What is Dshot1200 and Why Dshot1200 is Better?(http://www.blheli32.com/what-is-dshot1200-and-why-dshot1200-is-better/)
·       How to Get Dshot1200 Running in Betaflight?(http://www.blheli32.com/video-lets-talk-blheli-32-dshot1200/)
Downloads:
·       Download the latest BLHeli_32 Configurator here.(http://www.blheli32.com/download/)
·       Download the BLHeli_32 User Manual here.(http://www.blheli32.com/wp-content/uploads/2017/05/BLHeli_32-manual-ARM-Rev32.x.pdf)

Kakute F4 AIO V2

The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC), power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F4 AIO V2’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.

New V2 Features
·       Additional UART (UART 4) added to support serial camera communication such as to RunCam Split. Please note this is NOT the same as Betaflight Camera Control feature, which controls the menu of FPV cameras like Swift, etc.
·       Additional UART (UART 5) added to support ESC telemetry such as from BLHeli_32 and KISS.
·       Through-hole solder pads instead of flat pads for more secure soldering especially for beginners.
·       Barometer sensor on board allows altitude hold mode.
·       I2C pad available for certain external sensors.

Features
·       Supports Betaflight and Cleanflight.
·       Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
·       Soft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.
·       New high-performance / low-noise / high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz.
·       2 oz. copper PCB allows up to 120A maximum continuous current.
·       Dedicated bootloader button for easy firmware flashing.
·       Low-profile design fits into even very compact frames.
·       Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
·       Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 AIO monitors voltage directly from the battery power lead.
·       Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 1.5 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.
·       Supports BLHeli pass-through for easy ESC upgrade and configuration.

 
Specifications
·       MCU: STM32F405RGT6 32-bit processor
·       IMU: ICM20689 (SPI)
·       Barometer: BMP280
·       USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
·       5 hardware UARTS (UART1,3,4, 5, 6)
·       Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
·       128 Mbit Dataflash chip for Blackbox logging
·       Dimensions: 35x43x7mm (includes USB in height)
·       Mounting Holes: Standard 30.5mm square to center of holes
        Weight: 7g
 
Atlatl
Features
·       Supports Betaflight and Cleanflight.
·       Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
·       Soft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.
·       New high-performance / low-noise / high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz.
·       2 oz. copper PCB allows up to 120A maximum continuous current.
·       Dedicated bootloader button for easy firmware flashing.
·       Low-profile design fits into even very compact frames.
·       Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “BAT” pad only).
·       Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 AIO monitors voltage directly from the battery power lead.
·       Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 1.5 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.
·       Supports BLHeli pass-through for easy ESC upgrade and configuration.

Specifications
·       MCU: STM32F405RGT6 32-bit processor
·       IMU: ICM20689 (SPI)
·       USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
·       3 hardware UARTS (UART1,3,6)
·       128 Mbit Dataflash chip for Blackbox logging
·       Dimensions: 35x43x7mm (includes USB in height)
·       Mounting Holes: Standard 30.5mm square to center of holes
·       Weight: 7g

 
Package include
Kakute F4 ALL V2+Atlatl stack *1
Tekko32 ESC *1
Heat sink *1
80mm SMA--MMCX Cable *1
150mm 4pin JST GH wire *1
26AWG 100mm Black wire *1
26AWG 100mm White wire *1
26AWG 100mm Blue wire *1
18AWG 100mm Red wire *1
18AWG 100 Black wire *1



 
Average rating:

Maybe You Also Like...
Pixhawk 4
SALE
NEW
$170.00 $170.00
FPV Frame-Kopis 1
NEW
Kopis 1 FPV Racing Drones Spare Part
$49.00
Kakute F7 AIO
NEW
The Holybro Kakute F7All-In-One flight controller makes it easy to build your multirotor.
$49.00
Kakute F4 All-In-One V2
NEW
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
LED Board-Kopis 1
NEW
Kopis 1 FPV Racing Drones Spare Part
$11.00
Kakute F7
NEW
The Holybro Kakute F7 flight controller makes it easy to build your multirotor.
$45.00
Kakute F4 V2
NEW
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Kakute F7 AIO  & Tekko32 35A ESC * 4 Combo
NEW
Kakute F7 AIO & Tekko32 35A ESC * 4 Combo
$110.00
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
NEW
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
$104.00
Holybro Tekko 32 4in1 esc (BLHeli 32)
NEW
Powerful 4in1 ESC with BLHELI32 firmware natively supports ESC Telemetry function.
$56.00
Holybro Tekko32 35A ESC
NEW
Tekko32 is the latest BLHeli32 ESC from HolyBro Hobby, premium class product.
$16.99
MOTOR Air40 kv2450-Kopis 1
NEW
Kopis 1 FPV Racing Drones Spare Part
$13.98