HomeHome > Flight Controllers > Kakute F4

Kakute F4 V2 Mini

Item Code:
11047
The Holybro Kakute F4 V2 Mini flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot. Mounting Holes: 20x20mm
Unit Price:
USD $26.00
Price:
USD
$26.00
Shipping Cost:
to
PC
995 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service

The Holybro Kakute F4 V2mini flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot. The faster F4 processor gives room for future feature development: run all features at the fast 8 kHz PID loop rate, at single-digit CPU utilization! Because of issues with serial inversion, other F4 boards struggle to support protocols such as FrSky SBUS and SmartPort at the same time. The Kakute F4 V2mini is designed to support all serial protocols at once.

Features

• Supports Betaflight and Cleanflight.
• Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
• High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.
• Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units.
• Dedicated bootloader button for easy firmware flashing.
• Low-profile design fits into even very compact frames.
• Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
• Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 V2mini monitors voltage directly from the battery power lead.
• On-board regulators output 5v at up to 1.0 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.
• Supports BLHeli pass-through for easy ESC upgrade and configuration.
• 2 Additional PWM output, can be used for Camera control , motor5 or motor6 after resourced.

Specifications

• MCU: STM32F405RGT6 32-bit processor
• IMU: MPU6000 (SPI)
• Barometer: BMP280
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
• 5 hardware UARTS (UART1,3,4, 5, 6)
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
• 128 Mbit Dataflash chip for Blackbox logging
• Dimensions: 32x29x6mm (includes USB in height)
• Mounting Holes: Standard 20mm square to center of holes
• Weight: 4.4g

Pinout Diagram:


Package Includes:

1 x FC board
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x JST SH 8pin 150mm cable
1 x JST SH 6pin 150mm cable ( The cable that goes to the CADDX Vista Air Unit is included.)
1 x JST SH 6pin to GH 8pin 150mm cable ( The cable that goes to the DJI Air Unit is included.)
1 x JST SH 6pin to GH 8pin 80mm cable  ( The cable that goes to the DJI Air Unit is included.)

Manual:

Kakute F4 V2 Mini Manual

More relevant product options

https://shop.holybro.com/kakute-f4-v2-mini-stacks_p1242.html
https://shop.holybro.com/caddx-vista-digital-hd-system-for-dji-hd-fpv_p1214.html
https://shop.holybro.com/dji-digital-fpv-system_p1239.html

 

Maybe You Also Like...
Spare Parts-Kopis cinewhoop 2.5inch
NEW
Applicable for Kopis cinewhoop 2.5inch(SKU30076,30077)
$8.00
Kopis cinewhoop_2.5inch(free shipping)
NEW
Nebula Pro Vista Kit 720p/120fps low latency HD digital FPV system / T-Motor: F1404 KV3800 / GEMFAN D63-5B / Take-off Weight:248g
$144.00
Tekko32 F3 4IN1 Mini 35A ESC(35A)
NEW
BLHELI32 / F3 MCU/4x 35A/20x20mm
$43.00
H-RTK F9P GNSS Series
NEW
Differential high-precision multi-band GNSS positioning system series. UBLOX F9P module
$378.00
H-RTK M8P GNSS Series
NEW
H-RTK M8P is the latest differential high-precision GNSS positioning system from Holybro. It uses a UBLOX M8P module.
$199.00
Pix32 v5
HolyBro Pix32 v5 is a new flight controller we have developed on the base of FMUv5 scheme, which can be regarded as a variant version of ‘Pixhawk4’.
$143.00
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module.
$92.00
KakuteF7 HDV AIO
Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module.
$42.00