HomeHome > Flight Controllers > Kakute F7

Kakute F7 AIO V1.5

Item Code:
11041
Sold: 126
IMU updated to MPU6000,Re-designed and more reliable damping structure
Unit Price:
USD $49.00
Price:
USD
$49.00
Shipping Cost:
to
Delivery:
Estimated between
PC
61 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service

The Holybro Kakute F7All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC), power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F7 AIO’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.
IMU updated to MPU6000,Re-designed and more reliable damping structure

Features
• Supports Betaflight, Butterflight.
• Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
• Soft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.
• High-performance / low-noise / high sensitivity IMU. MPU6000 with 6-axis gyro and accelerometer. 
• Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA pads for use with external GPS/magnetometer units.
• 2 oz. copper PCB allows up to 120A maximum continuous current.
• Dedicated bootloader button for easy firmware flashing.
• Low-profile design fits into even very compact frames.
• Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
• Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 AIO monitors voltage directly from the battery power lead.
• Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.
• Supports BLHeli pass-through for easy ESC upgrade and configuration.

Specifications

  • MCU: STM32F745 32-bit processor
  • IMU: MPU6000 (SPI)
  • Barometer: BMP280
  • Current Sensor: Approximately 130 amps maximum measurable value
  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
  • 6 hardware UARTS (UART1,2,3,4,6,7)
  • All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
  • TF card for Blackbox logging
  • Dimensions: 35x48x7mm (includes foam-mounted gyro board in height)
  • Mounting Holes: Standard 30.5mm square to center of holes 
  • Weight: 11.2g


Package Includes:
FC board *1
Foam*1

Manual:
Holybro_Kakute_F7_AIO_V1.5_Manual.pdf

PX4 stack support:
https://docs.px4.io/master/en/flight_controller/kakutef7.html

More relevant product options

https://shop.holybro.com/kakute-f7-aio-v15-combo_p1190.html
https://shop.holybro.com/kakutef7-v15-imu-fpc-board_p1167.html


 

Average rating:

Maybe You Also Like...
Kopis mini_3inch(free shipping)
KOPIS is a high-performance ready-to-fly FPV racing drone from Holybro,
$179.00
X500 Kit
X500 Frame full carbon fiber twill,ARM diamete16mm, It is  perfectly compatible with the Holybro Pixhawk4 and Pixhawk4 Mini kits.The kit is easy to assemble.No soldering needed.
$425.00
X500 Frame Kit
Perfectly compatible with the Pixhawk4 set&Pixhawk4 mini set.
$86.00
Kopis2 6S V2(free shipping)
On Holybro Kopis 6S V2, the ESC installation direction has been changed while the power supply cord has been moved from the side of the quad to the tail, which will better protect the ESC. Kopis 6S V2 is equipped with a 1200TVL Foxeer Micro Razer FPV cam
$299.00
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 45A ESC Combo
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
$125.00
Kakute F7 V1.5 &Tekko 32 F3 4in1 45A esc  Combo
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
$100.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
Kakute F4 V2 & Tekko32 F3 4in1 45A ESC STACK
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
$86.00
Kakute F7 V1.5 Stack
IMU updated to MPU6000,Re-designed and more reliable damping structure
$69.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00