HomeHome > FC / ESC Stacks > Kakute F7 Stacks

Kakute F7 AIO V1.5&Tekko32 F3 Metal ESC*4 Combo

Item Code:
20078
Sold: 2
Unit Price:
USD $130.00
Price:
USD
$130.00
Shipping Cost:
to
Delivery:
Estimated between
PC
48 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service

Kakute F7 AIO V1.5

The Holybro Kakute F7All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC), power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F7 AIO’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.
IMU updated to MPU6000,Re-designed and more reliable damping structure


Features
• Supports Betaflight, Butterflight.
• Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
• Soft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.
• High-performance / low-noise / high sensitivity IMU. MPU6000 with 6-axis gyro and accelerometer. 
• Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA pads for use with external GPS/magnetometer units.
• 2 oz. copper PCB allows up to 120A maximum continuous current.
• Dedicated bootloader button for easy firmware flashing.
• Low-profile design fits into even very compact frames.
• Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
• Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 AIO monitors voltage directly from the battery power lead.
• Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.
• Supports BLHeli pass-through for easy ESC upgrade and configuration.

Specifications

  • MCU: STM32F745 32-bit processor
  • IMU: MPU6000 (SPI)
  • Barometer: BMP280
  • Current Sensor: Approximately 130 amps maximum measurable value
  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
  • 6 hardware UARTS (UART1,2,3,4,6,7)
  • All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
  • TF card for Blackbox logging
  • Dimensions: 35x48x7mm (includes foam-mounted gyro board in height)
  • Mounting Holes: Standard 30.5mm square to center of holes 
  • Weight: 11.2g


Tekko32 F3 Metal ESC (BLHeli32)

BLHELI32 / Current sensor / 6S / 65 A / F3 MCU
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.
Supports up to 80A burst and 65A continued. (ESC mounted under props, without anything covered on the ESC)
 

SPEC:
·  F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz
·  Mosfet tested at 4S 65A, under props, nothing covered for 1min
·  18 x 27 mm 
·  Supports Lipo 3-6S
·  Ext. cap needed for 6s (220uf 35v for 6s usage.)
·  Onboard WS2812B LED
·  Weight: 4.4g (1pcs)
 

Package included:
Kakute F7 AIO V1.5 board *1
Foam*1
Tekko32 F3 Metal ESC *1
Electrolytic capacito: 220uF 35v *1
24AWG 100mm Black wire *1
24AWG 100mm White wire *1
24AWG 100mm Blue wire *1
16AWG 100mm Red wire *1
16AWG 100mm Black wire *1


Manual:
   Holybro_Kakute_F7_AIO_V1.5 Manual.pdf
Some Tips:
   BLHeli_32 ESC Firmware Overview
 
Average rating:

Maybe You Also Like...
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
NEW
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
$125.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
Pixhawk 4
SALE
NEW
$170.00 $170.00
Kakute F7 V1.5 Stack
IMU updated to MPU6000,Re-designed and more reliable damping structure
$69.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2 & ATLATL HV V2 & Tekko32 4in1 esc (BLHeli 32) Combo
Kakute F4 V2 & ATLATL HV V2 & Tekko 32 4in1 esc (BLHeli 32) Combo
$105.00
Holybro Tekko32 4in1 esc (35A)
Powerful 4in1 ESC with BLHELI32 firmware natively supports ESC Telemetry function.
$56.00
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
$104.00
Holybro Tekko32 ESC(35A)
Tekko32 is the latest BLHeli32 ESC from HolyBro Hobby, premium class product.
$16.99