HomeHome > Flight Controllers > Kakute F7

Kakute F7 & Tekko32 4in1 esc (BLHeli 32) Combo

Item Code:
20048
Sold: 55
Kakute F7 & Tekko 32 4in1 esc (BLHeli 32) Combo
Unit Price:
USD $100.00
Price:
USD
$100.00
Shipping Cost:
to
Delivery:
Estimated between
PC
12 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service
Tekko32 4-in-1 35A ESC
Powerful 4in1 ESC with BLHELI32 firmware natively supports ESC Telemetry function.

Features:

4in1 ESC with 30.5x30.5mm mounting holes, supports DSHOT 1200, BLHELI32 firmware.
On this version added more CAPS to reduce power noise.
32bit ESC with BLHELI32 firmware
4PWM input
Voltage output (VBAT), ESC Telemetry(TELEM)
Supports Oneshot / Multishot / Dshot PWM
Supports damped light
NO BEC

 

Spec
Supports 3-6S lipo input
35A continuous current, 50A burst
Mounting holes 30.5x30.5mm
Size:55*40*6.4mm
Weight: 17g


Package includes:
1*Tekko32 4in1 ESC board
1* 8pin to 8pin 1mm pitch cable


Some Tips:
BLHeli_32 ESC Firmware Overview
What is Dshot1200 and Why Dshot1200 is Better?
How to Get Dshot1200 Running in Betaflight?


Downloads:
Download the latest BLHeli_32 Configurator here
Download the BLHeli_32 User Manual here


Pin Map

















 
















Kakute  F7

The Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates flight controller (FC) and on-screen display (OSD) in one. The Kakute F7’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.

Features
• Supports Betaflight, Butterflight, and Cleanflight.
• Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
• Soft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.
• High-performance / low-noise / high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz sampling rate.
• Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA pads for use with external GPS/magnetometer units.
• 2 oz. copper PCB allows up to 120A maximum continuous current.
• Dedicated bootloader button for easy firmware flashing.
• Low-profile design fits into even very compact frames.
• Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
• Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 monitors voltage directly from the power supply.
• Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.
• Supports BLHeli pass-through for easy ESC upgrade and configuration.


Specifications
• MCU: STM32F745 32-bit processor
• IMU: ICM20689 (SPI)
• Barometer: BMP280
• Current Sensor: Approximately 130 amps maximum measurable value
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
• 6 hardware UARTS (UART1,2,3,4,6,7)
• All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
• TF card for Blackbox logging

• Dimensions: 35x41x7mm (includes foam-mounted gyro board in height)
• Mounting Holes: Standard 30.5mm square to center of holes
• Weight: 9g

http://www.holybro.com/manual/Holybro_Kakute_F7_Manual.pdf

 
 
 
Average rating:

Maybe You Also Like...
Pixhawk 4
SALE
NEW
$170.00 $170.00
Kakute F7 AIO
NEW
The Holybro Kakute F7All-In-One flight controller makes it easy to build your multirotor.
$49.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F7
NEW
The Holybro Kakute F7 flight controller makes it easy to build your multirotor.
$45.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Kakute F7 AIO  & Tekko32 35A ESC * 4 Combo
NEW
Kakute F7 AIO & Tekko32 35A ESC * 4 Combo
$110.00
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
$104.00
Holybro Tekko32 4in1 esc (BLHeli 32)
Powerful 4in1 ESC with BLHELI32 firmware natively supports ESC Telemetry function.
$56.00
Holybro Tekko32 35A ESC
Tekko32 is the latest BLHeli32 ESC from HolyBro Hobby, premium class product.
$16.99
Kakute F7 AIO & ATLATL HV & Tekko32 35A ESC * 4 Combo
Kakute F7 AIO & ATLATL HV & Tekko32 35A ESC * 4 Combo
$135.00
Kakute F7 & ATLATL HV V2 & Tekko32 4in1 esc (BLHeli 32) Combo
NEW
Kakute F7 & ATLATL HV V2 & Tekko 32 4in1 esc (BLHeli 32) Combo
$125.00
Transceiver Telemetry Radio Set V3
SALE
Pixhawk 4 compatibal
$39.00 $39.00