HomeHome > FC / ESC Stacks > Kakute F7 Stacks

Kakute F7 V1.5 &Tekko 32 F3 4in1 40A esc Combo

Item Code:
20076
Sold: 73
Kakute F7 V1.5 & Tekko 32 F3 4in1 40A esc Combo
Unit Price:
USD $100.00
Price:
USD
$100.00
Shipping Cost:
to
Delivery:
Estimated between
PC
48 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service

Tekko 32 F3 4in1 40A ESC
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed. Supports up to 55A burst and 40A continued.
 

Features:

  • 32bit ESC with BLHELI32 firmware

  • Supports 3-6S lipo input

  • PWM input, TLM supported

  • Voltage output (VBAT)

  • NO BEC

  • Supports oneshot / Multishot / Dshot PWM

  • Mounting holes 30.5x30.5mm

  • Supports damped light

  • F3 MCU, runs double faster than F051

  • Extra Cap needed for high current or 6s usage

  • Dimensions: 44x37x6mm

  • Weight: 11.6g

 
Pin MAP:             
 

Some Tips:

Kakute  F7 V1.5

The Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates flight controller (FC) and on-screen display (OSD) in one. The Kakute F7’s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.
IMU updated to MPU6000,Re-designed and more reliable damping structure


Features

  • Supports Betaflight.

  • Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.

  • Soft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.

  • High-performance / low-noise / high sensitivity IMU. MPU6000 with 6-axis gyro and accelerometer.

  • Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA pads for use with external GPS/magnetometer units.

  • Dedicated bootloader button for easy firmware flashing.

  • Low-profile design fits into even very compact frames.

  • Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).

  • Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 monitors voltage directly from the power supply.

  • Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.

  • Supports BLHeli pass-through for easy ESC upgrade and configuration.


Specifications

  • MCU: STM32F745 32-bit processor

  • IMU: MPU6000 (SPI)

  • Barometer: BMP280

  • Current Sensor: Approximately 130 amps maximum measurable value

  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)

  • 6 hardware UARTS (UART1,2,3,4,6,7)

  • All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.

  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.

  • TF card for Blackbox logging

  • Dimensions: 35x41x7mm (includes foam-mounted gyro board in height)

  • Mounting Holes: Standard 30.5mm square to center of holes 

  • Weight: 8g

Package Includes:
Kakute F7 V1.5 +Tekko 32 F3 4in1 40A ESC stack *1
Electrolytic capacito: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1


Manual:
Holybro_Kakute_F7_V1.5_Manual.pdf

 

 

 

 

 

 
 
 
Average rating:

Maybe You Also Like...
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
NEW
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
$125.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
Pixhawk 4
SALE
NEW
$170.00 $170.00
Kakute F7 V1.5 Stack
IMU updated to MPU6000,Re-designed and more reliable damping structure
$69.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2 & ATLATL HV V2 & Tekko32 4in1 esc (BLHeli 32) Combo
Kakute F4 V2 & ATLATL HV V2 & Tekko 32 4in1 esc (BLHeli 32) Combo
$105.00
Holybro Tekko32 4in1 esc (35A)
Powerful 4in1 ESC with BLHELI32 firmware natively supports ESC Telemetry function.
$56.00
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
$104.00
Holybro Tekko32 ESC(35A)
Tekko32 is the latest BLHeli32 ESC from HolyBro Hobby, premium class product.
$16.99