HomeHome > FC / ESC Stacks > Kakute H7 Stacks

Kakute H7 Mini Stacks

Item Code:
20160,20161,20162,20163,
Kakute H7 mini Flight Controller / Tekko32 F4 4in1 mini 45A ESC / Tekko32 F4 BigFET 4in1 50A ESC / Atlatl HV micro VTx
Unit Price:
USD $118.99
Price:
USD
$118.99
Shipping Cost:
to
PC
  • Product Details
  • Write a Comment(0)
  • After-sales Service

Tekko32 F4 4in1 mini 45A ESC

SPEC:

  • F4 MCU with BLHELI32 firmware

  • Maximum PWM output upto 96K (default 48K)

  • Amperage meter scale ratio has been adjusted to 168.

  • PWM input, TLM supported

  • Voltage output (VBAT)

  • NO output BEC

  • Supports oneshot / Multishot / Dshot PWM

  • Supports damped light

  • Supports 3-6S lipo input

  • Ext. cap needed for 6s (1000uf 35v for 6s usage.)

  • Mounting holes: 20x20mm(M3)

  • Size:30 x 39 mm

  • Weight: 7.2g


PIN MAP:

Tekko32 F4 Bigfet 4in1 50A ESC

F4 MCU / PWM output up to 96K / 4~6S / BLHELI32
Tekko32 F4 BigFET are made for those that uses 20x20 mount and also need the power of big MOSFET. The F4 MCU & quality big MOSFET onboard will provide smooth control, quick response, and big power for racers and freestyle pilots.

Features:

  • New F4 MCU, much faster than F3 & F0

  • PWM output up to 96K (default 48K)

  • 20x20 Mount design with big MOSFET

  • Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Specification:

  • Continuous Current: 50A x4

  • Burst Current: 60A x4

  • Supports 4-6S battery

  • Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.

  • ESC telemetry Supported

  • Onboard analog current sensor

  • No output BEC

  • BLHeli_32 firmware

  • 1000uf 35v capacitor included (highly recommended for 6s setup)

  • Amperage meter scale ratio: 168

  • Dimensions: 39x36.5x6mm / Weight: 11.8g

  • Mounting holes: M4 30.5x30.5mm (M3 grommets included)

Pin Map:

Atlatl HV micro

Features

  • Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.

  • Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.

  • SmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.

  • All parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.

  • MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.

  • LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.

  • Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.

  • 0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.

  • Built in microphone, so you can listen to your motors while you fly, no matter how far away you fly.

  • Standard 26mm form factor allows you to mount the Atlatl directly on your flight controller stack.

Specifications

  • Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW

  • Audio: 6.5 MHz Mono

  • Protocol:smart audio2.0

  • Antenna Connector: MMCX

  • Input Voltage: 7 to 28 volts (2-6S LiPo)

  • Dimensions: 30x26mm

  • Mounting Holes: Standard 20mm square to center of holes (M3)

  • Weight: 3.6g

Package Includes:

SKU20160 Kakute H7 Mini+Tekko32 F4 4in1 mini 45A ESC Stack
SKU20162 Kakute H7 Mini+Tekko32 F4 Bigfet 4in1 50A ESC Stack

1x Kakute H7 Mini STACK
1x Electrolytic capacito: 1000uF 35v *1
1x JST SH 8pin to 8pin 65mm cable *1
1x JST SH 8pin to 8pin 25mm cable *1
1x JST SH 6pin 150mm cable*1 (The cable that goes to the CADDX Vista Air Unit is included.)
1x JST SH 6pin to GH 8pin 150mm cable*1 (The cable that goes to the DJI Air Unit is included.)
1x JST SH 6pin to GH 8pin 80mm cable*1 (The cable that goes to the DJI Air Unit is included.)


SKU20161 Kakute H7 Mini+Tekko32 F4 4in1 mini 45A ESC +Atlatl HV Micro Stack 
SKU20163 Kakute H7 Mini+Tekko32 F4 Bigfet 4in1 50A ESC+Atlatl HV Micro Stack

1x Kakute H7 Mini STACK
1x Electrolytic capacito: 1000uF 35v *1
1x JST SH 8pin to 8pin 65mm cable *1
1x JST SH 8pin to 8pin 25mm cable *1
1x JST SH 6pin 150mm cable*1 ( The cable that goes to the CADDX Vista Air Unit is included.)
1x JST SH 6pin to GH 8pin 150mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
1x JST SH 6pin to GH 8pin 80mm cable*1  ( The cable that goes to the DJI Air Unit is included.)
1x 80mm SMA--MMCX Cable
1x 60mm Antenna
1x 150mm 4pin JST GH wire

Manual: