HomeHome > FC / ESC Stacks > Kakute F7 Stacks

KakuteF7 HDV&Tekko32 F3 4in1 40A ESC STACK

Item Code:
20071
Sold: 13
Unit Price:
USD $92.00
Price:
USD
$92.00
Shipping Cost:
to
Delivery:
Estimated between
PC
37 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service

KAKUTE F7 HDV

Overview
HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect HolyBro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.

Features
  • Supports Betaflight.
  • High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.
  • Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units.
  • Dedicated bootloader button for easy firmware flashing.
  • Low-profile design fits into even very compact frames.
  • Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
  • Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV monitors voltage directly from the power supply.
  • Filtered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.
  • Supports BLHeli pass-through for easy ESC upgrade and configuration.

Specifications
  • MCU: STM32F745 32-bit processor
  • IMU:MPU6000
  • Barometer: BMP280
  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
  • 6 hardware UARTS (UART1,2,3,4,6,7)
  • All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
  • TF card for Blackbox logging
  • Dimensions: 35x35mm
  • Mounting Holes: Standard 30.5mm square to center of holes 
  • Weight: 8g

Tekko32F3 4in1 40A ESC

New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed. Supports up to 55A burst and 40A continued.
 

Features:
  • 32bit ESC with BLHELI32 firmware
  • Supports 3-6S lipo input
  • PWM input, TLM supported
  • Voltage output (VBAT)
  • NO BEC
  • Supports oneshot / Multishot / Dshot PWM
  • Mounting holes 30.5x30.5mm
  • Supports damped light
  • F3 MCU, runs double faster than F051
  • Extra Cap needed for high current or 6s usage
  • Dimensions: 44x37x6mm
  • Weight: 11.6g
 Pin MAP:

Package includes:
KAKUTE F7 HDV&Tekko32F3 4in1 40A ESC STACK *1
Electrolytic capacito: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1
JST GHR 8pin to JST GHR 6pin 80mm cable*1 

Manual:

Holybro Kakute F7 HDV Manual
 
Average rating:

Maybe You Also Like...
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
NEW
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
$125.00
Kakute F7 V1.5
NEW
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
Pixhawk 4
SALE
NEW
$170.00 $170.00
Pixhawk4 mini
NEW
$139.00
Kakute F7 AIO
NEW
The Holybro Kakute F7All-In-One flight controller makes it easy to build your multirotor.
$49.00
Kakute F7
NEW
The Holybro Kakute F7 flight controller makes it easy to build your multirotor.
$45.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F7 AIO & ATLATL HV & Tekko32 35A ESC * 4 Combo
Kakute F7 AIO & ATLATL HV & Tekko32 35A ESC * 4 Combo
$135.00
Kakute F7 AIO  & Tekko32 35A ESC * 4 Combo
NEW
Kakute F7 AIO & Tekko32 35A ESC * 4 Combo
$110.00
Kakute F4 V2 & ATLATL HV V2 & Tekko32 4in1 esc (BLHeli 32) Combo
NEW
Kakute F4 V2 & ATLATL HV V2 & Tekko 32 4in1 esc (BLHeli 32) Combo
$105.00
Holybro Tekko32 4in1 esc (35A)
Powerful 4in1 ESC with BLHELI32 firmware natively supports ESC Telemetry function.
$56.00