HomeHome > FC / ESC Stacks > Kakute F7 Stacks

KakuteF7 HDV&Tekko32 F3 4in1 45A ESC STACK

Item Code:
20071
Sold: 31
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
Unit Price:
USD $92.00
Price:
USD
$92.00
Shipping Cost:
to
Delivery:
Estimated between
PC
194 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service

KAKUTE F7 HDV

Overview
HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.

Features
  • Supports Betaflight.
  • High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.
  • Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units.
  • Dedicated bootloader button for easy firmware flashing.
  • Low-profile design fits into even very compact frames.
  • Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
  • Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV monitors voltage directly from the power supply.
  • Filtered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.
  • Supports BLHeli pass-through for easy ESC upgrade and configuration.

Specifications
  • MCU: STM32F745 32-bit processor
  • IMU:MPU6000
  • Barometer: BMP280
  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
  • 6 hardware UARTS (UART1,2,3,4,6,7)
  • All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
  • TF card for Blackbox logging
  • Dimensions: 35x35mm
  • Mounting Holes: Standard 30.5mm square to center of holes 
  • Weight: 8g

Tekko32F3 4in1 45A ESC

The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
 
Features:
  • 32bit ESC with BLHELI32 firmware
  • Supports 3-6S lipo input
  • PWM input, TLM supported
  • Voltage output (VBAT)
  • NO BEC
  • Supports oneshot / Multishot / Dshot PWM
  • Mounting holes 30.5x30.5mm
  • Supports damped light
  • F3 MCU, runs double faster than F051
  • Extra Cap needed for high current or 6s usage
  • Dimensions: 44x37x6mm
  • Weight: 11.6g
 Pin MAP:

Package includes:
KAKUTE F7 HDV&Tekko32F3 4in1 45A ESC STACK *1
Electrolytic capacito: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1
JST GHR 8pin to JST GHR 6pin 80mm cable*1 

Manual:

Holybro Kakute F7 HDV Manual
 
Average rating:

Maybe You Also Like...
Kopis mini_3inch(free shipping)
KOPIS is a high-performance ready-to-fly FPV racing drone from Holybro,
$179.00
X500 Kit
X500 Frame full carbon fiber twill,ARM diamete16mm, It is  perfectly compatible with the Holybro Pixhawk4 and Pixhawk4 Mini kits.The kit is easy to assemble.No soldering needed.
$425.00
X500 Frame Kit
Perfectly compatible with the Pixhawk4 set&Pixhawk4 mini set.
$86.00
Kopis2 6S V2(free shipping)
On Holybro Kopis 6S V2, the ESC installation direction has been changed while the power supply cord has been moved from the side of the quad to the tail, which will better protect the ESC. Kopis 6S V2 is equipped with a 1200TVL Foxeer Micro Razer FPV cam
$299.00
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 45A ESC Combo
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
$125.00
Kakute F7 V1.5 &Tekko 32 F3 4in1 45A esc  Combo
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
$100.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
Kakute F4 V2 & Tekko32 F3 4in1 45A ESC STACK
The latest tekko32 45A 4in1 ESC has got some improvements on its performance: 1) Enhanced BEC, withstand voltage up to 80V. 2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter
$86.00
Kakute F7 V1.5 Stack
IMU updated to MPU6000,Re-designed and more reliable damping structure
$69.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00