HomeHome > FPV Racing Drones > Kopis

Kopis CineWhoop_3inch(free shipping)

Item Code:
30060,30061,30065,30066
The supply of stardard 1507 motors for Holybro Kopis series has resumed. All Kopis series will be equipped with 1507 stardard motors and T3140 propellers.
Unit Price:
USD $199.00
Price:
USD
$199.00
Shipping Cost:
to
Delivery:
Estimated between
pc
195 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service

The supply of stardard 1507 motors for Holybro Kopis series has resumed. All Kopis series will be equipped with 1507 stardard motors and T3140 propellers.

Kopis CineWhoop(DJI FPV version)  #30060,30061

Features

  • Frame:3mm 3k carbon fiber
  • Flight Controller:Kakute F7 HDV 
  • ESC:Tekko32 F3 4in1 45A mini ESC
  • VTx:DJI FPV Air Unit
  • Motor:F1507 KV3800(Standard)
  • Propeller:T3140
  • Buzzer included.
  • Battery plug: XT60
  • Dimensions:178*205*40mm
  • Wheelbase: 148.6mm
  • Weight:274g(included DJI air unit)
  • Recommend battery: 650mah~1300mah 4s

Specifications

  • MCU: STM32F745 32-bit processor
  • IMU: MPU6000 (SPI)
  • Barometer: BMP280
  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
  • 6 hardware UARTS (UART1,2,3,4,6,7)
  • All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
  • TF card for Blackbox logging

Includes:

  • 1x Kopis CineWhoop FPV racing drone
  • DJI FPV Air Unit(Optional)
  • 4x T3140 Propeller
  • 1x Carying case
  • 1x Battery strap(installed)

 

Kopis CineWhoop(Analog VTx version) #30065,30066

Features

  • Frame:3mm 3k carbon fiber
  • Flight Controller:Kakute F7 V1.5 
  • ESC:Tekko32 F3 4in1 45A mini ESC
  • VTx:Atlatl HV V2
  • Motor:F1507 KV3800(Standard)
  • Propeller:T3140
  • FPV camera:1200TVL Foxeer Micro Razer FPV Camera
  • Adjustable camera uptilt from 0 degrees to 90 degrees
  • Buzzer included.
  • Battery plug: XT60
  • Dimensions:178*205*40mm
  • Wheelbase: 148.6mm
  • Weight:237g
  • Recommend battery: 650mah~1300mah 4s

Specifications

  • MCU: STM32F745 32-bit processor
  • IMU: MPU6000 (SPI)
  • Barometer: BMP280
  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
  • 6 hardware UARTS (UART1,2,3,4,6,7)
  • All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
  • TF card for Blackbox logging

Includes:

  • 1x Kopis CineWhoop FPV racing drone
  • 4x T3140 Propeller
  • 1x Protective Case Mount for GoPro Hero5
  • 1x Carying case
  • 1x Battery strap(installed)


Manual:

Setting:

       cinewhoop DJI version_Joshua Bardwell setting

3D Print:

        Kopis CineWhoop-3D_Print.rar
        GoPro_HERO5_TPU_3D_Print.stl

Spare Parts-Kopis CineWhoop

        https://shop.holybro.com/spare-parts-kopis-cinewhoop_p1199.html

Maybe You Also Like...
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$92.00
KakuteF7 HDV AIO
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$42.00
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$49.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00
Pixhawk 4 GPS Module
SALE
Pixhawk 4 GPS Module with JST GH 10 Pin connector for Pixhawk 4 "GPS Module" input port
$42.00 $42.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Pix32"Pixhawk" Flight Controller
This board is based on the Pixhawk project FMUv2 open hardware design. It is also know as Pixhawk 2,with hardware version px4 2.4.6.
$129.00