HomeHome > FPV Racing Drones > Kopis

Kopis2 6S V2(free shipping)

Item Code:
30069,30070
Sold: 46
On Holybro Kopis 6S V2, the ESC installation direction has been changed while the power supply cord has been moved from the side of the quad to the tail, which will better protect the ESC. Kopis 6S V2 is equipped with a 1200TVL Foxeer Micro Razer FPV cam
Unit Price:
USD $299.00
Price:
USD
$299.00
  • Optional items:
    PNF (No Receiver) BNF (Frsky Receiver_R-XSR)
Shipping Cost:
to
Delivery:
Estimated between
PC
94 in Stock
  • Product Details
  • Write a Comment(1)
  • After-sales Service

Kopis2 6S V2

Description

KOPIS is a high-performance ready-to-fly FPV racing drone from Holybro, Low-deck design means centralized mass and excellent handling. Stretched-X motor layout is the choice of top racers because the rear props are further from the "dirty air" coming from the front props. The result is smoother cornering and higher top speed. The FPV antenna is in a unique location behind the quad, to protect against damage. Kakute F7 flight controller and Atlatl HV V2 video transmitter give perfectly integrated control of all quadcopter systems. TMOTOR F60 Pro-IV 1750kv motors give awesome power and speed, just like top racers. Foxeer Micro Razer FPV Camera is light and small, with great image quality. KOPIS gives all the performance, looks, and durability of a hand-built machine, without ever having to pick up a soldering iron!

On Holybro Kopis 6S V2, the ESC installation direction has been changed while the power supply cord has been moved from the side of the quad to the tail, which will better protect the ESC.  Kopis 6S V2 is equipped with a 1200TVL Foxeer Micro Razer FPV camera with higher resolution.

Features

  • 5mm full 3k carbon fiber
  • Counter-sunk screws on base for great appearance and protection of battery against damage.
  • KakuteF7 V1.5 flight controller with soft-mounted gyro for mechanical filtering of vibration. Means you can disable more software filters for best flight handling.
  • Improved soft-mounting foam for KakuteF7 gives optimal balance of stiffness and damping for even better gyro performance than before!
  • Betaflight OSD included. Monitor voltage and battery capacity in your FPV goggles. Change PIDs and Rates using your transmitter sticks.
  • Atlatl HV V2 video transmitter:
    • 5.8 GHz
    • Standard 40-channel set. However 5645 MHz and 5925 MHz  5945 MHz are illegal in many areas, so they are not supported. If you select one of these channels, it will simply fail to work.
    • Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
    • MMCX antenna connector for easy, secure connection. Won’t break or come loose like the IPEX connector used on other vTX.
    • Control the vTX channel and transmit power from the OSD using your transmitter sticks or from your Transmitter. No more picking up the quad to change vTX settings!
  • Buzzer included.
  • Foxeer Micro Razer FPV Camera
  • Adjustable camera uptilt from 0 degrees to 90 degrees.
  • Serial receiver supported (SBUS, iBUS, Spektrum).

Specifications

  • MCU: STM32F745VGT6 32-bit processor
  • IMU: MPU6000 (SPI)
  • Barometer: BMP280
  • TF card for Blackbox logging
  • Tekko32F3 4-in-1 40A ESC
  • Supports 6S battery
  • Weight 325 grams without battery or props

Includes:

1x KOPIS2 FPV racing drone
1x 5.8GHz FPV antenna
4x T5143S Propeller
4x T5147 Propeller
1x battery strap(installed)

Manual:

Holybro_Kopis2_6S_V2 Manual.pdf

3D Print

Camera Mount-TPU-Kopis2 6S&SE.stl

Spare Parts-Kopis2 6S V2

https://shop.holybro.com/spare-parts-kopis2-6s_p1205.html
KakuteF7 V1.5 IMU FPC Board

Maybe You Also Like...
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
KakuteF7 HDV AIO
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$42.00
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$49.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00
Kakute F7 mini V2
B+ pad available on KakuteF7 mini V2, with IMU upgraded into MPU6000
$33.00
Pixhawk 4 GPS Module
SALE
Pixhawk4 GPS
$42.00 $42.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Pix32"Pixhawk" Flight Controller
This board is based on the Pixhawk project FMUv2 open hardware design. It is also know as Pixhawk 2,with hardware version px4 2.4.6.
$129.00