HomeHome > FPV Drones > Kopis

Kopis2 6S V2 5"(free shipping)

Item Code:
30069,30070
Updated:
1. Flight controller: Kakute H7 BT
2. ESC: Tekko32 F4 4in1 50A ESC
Unit Price:
USD $299.00
Price:
USD
$299.00
  • Optional items:
    PNF (No Receiver) BNF (Frsky Receiver_R-XSR)
Shipping Cost:
to
PC
  • Product Details
  • Write a Comment(1)
  • After-sales Service

Kopis2 6S V2

Updated:
1. Flight controller: Kakute H7 BT
2. ESC: Tekko32 F4 4in1 50A ESC

Description

KOPIS is a high-performance ready-to-fly FPV racing drone from Holybro, Low-deck design means centralized mass and excellent handling. Stretched-X motor layout is the choice of top racers because the rear props are further from the "dirty air" coming from the front props. The result is smoother cornering and higher top speed. The FPV antenna is in a unique location behind the quad, to protect against damage. Kakute H7 flight controller and Atlatl HV V2 video transmitter give perfectly integrated control of all quadcopter systems. TMOTOR F60 Pro-IV 1750kv motors give awesome power and speed, just like top racers. Foxeer Micro Razer FPV Camera is light and small, with great image quality. KOPIS gives all the performance, looks, and durability of a hand-built machine, without ever having to pick up a soldering iron!

Features

  • 5mm full 3k carbon fiber
  • Kakute H7 Flight Controller is full of features including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, HD camera plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD card slot, 5V and 9V BEC, easy soldering layout and much more.
  • Tekko32 F4 4in1 50A ESC
    • New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
    • PWM output up to 96K (default 48K)
    • Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
  • Counter-sunk screws on base for great appearance and protection of battery against damage.
  • Betaflight OSD included. Monitor voltage and battery capacity in your FPV goggles. Change PIDs and Rates using your transmitter sticks.
  • Atlatl HV V2 video transmitter:
    • 5.8 GHz
    • Standard 40-channel set. However 5645 MHz and 5925 MHz  5945 MHz are illegal in many areas, so they are not supported. If you select one of these channels, it will simply fail to work.
    • Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
    • MMCX antenna connector for easy, secure connection. Won’t break or come loose like the IPEX connector used on other vTX.
    • Control the vTX channel and transmit power from the OSD using your transmitter sticks or from your Transmitter. No more picking up the quad to change vTX settings!
  • Buzzer included.
  • Foxeer Micro Razer FPV Camera
  • Adjustable camera uptilt from 0 degrees to 90 degrees.
  • Serial receiver supported (SBUS, iBUS, Spektrum).
  • Supports 6S battery
  • Wheelbase:220mm
  • Weight 325 grams without battery or props

Specifications

Kakute H7

  • MCU - STM32H743 32-bit processor running at 480 MHz
  • IMU - MPU6000
  • Barometer - BMP280
  • OSD - AT7456E
  • Onboard Bluetooth chip - ESP32-C3
    • SpeedyBee IOS & Android App Compatible 
    • Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm).
  • 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
  • 9x PWM Outputs (8 Motor Output, 1 LED)
  • 2x JST-SH1.0_8pin port (4in1 ESCs, x8/Octocopter compatible)
  • 1x JST-GH1.5_6pin port (For HD System like Caddx Vista & Air Unit)
  • Battery input voltage: 7V to 42V
  • BEC 5V 2A Cont.
  • BEC 9V 1.5A Cont.
  • Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
  • Dimension - 35x35mm
  • Weight - 8g

Includes:

1x KOPIS2 FPV racing drone
1x 5.8GHz FPV antenna
4x T5143S Propeller
4x T5147 Propeller
1x battery strap(installed)

Please note: Starting from April 12th, 2022, all Kopis BNF will no longer include the Kopis Carry case.

Manual:

Holybro_Kopis2_6S_V2 Manual.pdf

3D Print

Camera Mount-TPU-Kopis2 6S&SE.stl

Setting:

Kopis2 6S V2_DUMP

Spare Parts-Kopis2 6S V2

https://shop.holybro.com/spare-parts-kopis2-6s_p1205.html