HomeHome > FPV Racing Drones > Kopis

KOPIS2 -ROTOR RIOT special edition

Item Code:
Sold: 5
KOPIS2 -ROTOR RIOT special edition
Unit Price:
USD $335.00
Shipping Cost:
Estimated between
1 in Stock
  • Product Details
  • Reviews(1)
  • Write a Comment
  • After-sales Service
KOPIS is a high-performance ready-to-fly FPV racing drone from Holybro. Low-deck design means centralized mass and excellent handling. Stretched-X motor layout is the choice of top pilots because the rear props are further from the "dirty air" coming from the front props. The result is smoother cornering and higher top speed. The FPV antenna is in a unique location behind the quad, to protect against damage. Kakute F7 and Atlatl HV V2 video transmitter give perfectly integrated control of all quadcopter systems. KOPIS gives all the performance, looks, and durability of a hand-built machine, without ever having to pick up a soldering iron!
Now Holybro partners with Rotor Riot and Joshua Bardwell to release the Special Edition Kopis 2. The motors are upgraded to HypeTrain Stingy 2207/2150kv. These can operate on voltage from 4S (for controlled proximity flying), 5S (all purpose), and 6S (maximum power and speed). The camera is upgraded to the Runcam Micro Eagle / Bardwell edition, with customized settings by Joshua Bardwell to let you enjoy the Eagle's awesome image quality, and to reduce or eliminate digital image noise and white-flashing.

  • 5mm Carbon Fibre-reinforced Polymer
  • Counter-sunk screws on base for great appearance and protection of battery against damage.
  • KakuteF7 flight controller with soft-mounted gyro for mechanical filtering of vibration. Means you can disable more software filters for best flight handling.
  • Improved soft-mounting foam for KakuteF7 gives optimal balance of stiffness and damping for even better gyro performance than before!
  • Betaflight OSD included. Monitor voltage and battery capacity in your FPV goggles. Change PIDs and Rates using your transmitter sticks.
  • Atlatl HV V2 video transmitter:
    • 5.8 GHz
    • Standard 40-channel set. However 5645 MHz and 5925 MHz  5945 MHz are illegal in many areas, so they are not supported. If you select one of these channels, it will simply fail to work.
    • Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
    • MMCX antenna connector for easy, secure connection. Won’t break or come loose like the IPEX connector used on other vTX.
    • Control the vTX channel and transmit power from the OSD using your transmitter sticks or from your Transmitter. No more picking up the quad to change vTX settings!
  • Buzzer included.
  • HypeTrain Stingy 2207/2150kv.
  • RunCam Micro Eagle FPV camera
  • Adjustable camera uptilt from 0 degrees to 90 degrees.
  • Serial receiver supported (SBUS, iBUS, Spektrum). Legacy PPM and PWM receivers not supported.
  • MCU: STM32F745VGT6 32-bit processor
  • IMU: ICM20689 (SPI) 32 kHz capable
  • Barometer: BMP280
  • TF card for Blackbox logging
  • Tekko32 BLHeli_32 4-in-1 ESC (Dshot1200 compatible)
  • Supports 4S-6S battery (motors are optimized for 5S)
  • Weight 299 grams without battery or props
  • 1x KOPIS2 FPV racing drone
  • 2x extra spare arms
  • 1x 5.8GHz FPV antenna
  • 8x 5046 DALPROP CYCLONE Propeller
  • 1x battery strap(installed)
KOPIS2 -ROTOR RIOT special edition Manual
Recent Reviews
  • Bymert kaptan
  • Nov 06, 2019
when will it be in stock again. thanks

Maybe You Also Like...
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
Pixhawk 4
$170.00 $170.00
Kakute F7 V1.5 Stack
IMU updated to MPU6000,Re-designed and more reliable damping structure
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
Kakute F4 V2 & ATLATL HV V2 & Tekko32 4in1 esc (BLHeli 32) Combo
Kakute F4 V2 & ATLATL HV V2 & Tekko 32 4in1 esc (BLHeli 32) Combo
Holybro Tekko32 4in1 esc (35A)
Powerful 4in1 ESC with BLHELI32 firmware natively supports ESC Telemetry function.