HomeHome > ESC > Kotleta(UAVCAN ESC)

Kotleta20

Item Code:
31021
Kotleta 20 is an advanced sensorless BLDC propeller drive controller with CAN bus interface. It runs the Sapog* Firmware. Kotleta 20 has one CAN bus with two sockets onboard.
Unit Price:
USD $35.00
Price:
USD
$35.00
  • Quantity:
    1pcs 4pcs
Shipping Cost:
to
Delivery:
Estimated between
pc
2 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service
Kotleta 20 is an advanced sensorless BLDC propeller drive controller with CAN bus interface. It runs the Sapog* Firmware.
Kotleta 20 has one CAN bus with two sockets onboard.


Features
• Excellent dynamic characteristics.
• Regenerative braking and active freewheeling.
• 500 W continuous power output at 8.8 g weight.
• Optional RPM control loop (RPM governor).
• Self diagnostics and health status reporting.
• Highly configurable.
• Low noise and low current ripple due to the low-ESR embedded filtering capacitors and highfrequency PWM.
• Supported interfaces:
• CAN (ISO 11898-2)
• UART.
• RCPWM (analog PWM interface widely used in robotics).
• High quality assurance:
• Protection against unlicensed (counterfeit) production by means of a digital signature installed on every manufactured unit.
• Open source firmware - Sapog (3-clause BSD license).





Package included:
• Kotleta 20 ESC*4 (Combo)
• 100 mm long 16 AWG wires(Red) *4
• 100 mm long 16 AWG wires(Black)*4
• Electrolytic capacito: 220uF 35v *4
• 4 to 4 pin cable (CAN) *4
• 6 to 6 pin cable(Debug) *1
• Micro termination plug *1


Download:
Kotleta20 datasheet.pdf
Sapog_v2_Reference_Manual.pdf
UAVCAN_Specification

User guide:
https://docs.px4.io/master/en/peripherals/uavcan_escs.html
Maybe You Also Like...
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$92.00
KakuteF7 HDV AIO
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$42.00
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$49.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00
Pixhawk 4 GPS Module
SALE
Pixhawk 4 GPS Module with JST GH 10 Pin connector for Pixhawk 4 "GPS Module" input port
$42.00 $42.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Pix32"Pixhawk" Flight Controller
This board is based on the Pixhawk project FMUv2 open hardware design. It is also know as Pixhawk 2,with hardware version px4 2.4.6.
$129.00