HomeHome > Telemetry Radios > 433MHz

Micro Transceiver Telemetry Radio Set

Item Code:
17005
Unit Price:
USD $29.00
Price:
USD
$29.00
  • Radio:
    100mW Micro Transceiver Telemetry Radio Set 433MHz 100mW Micro Transceiver Telemetry Radio Set 915MHz
Shipping Cost:
to
Delivery:
Estimated between
Units
54 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service

Features:



915 or 433 MHz 
6-position Molex connector 
100 mW maximum output power (adjustable) 
-117 dBm receive sensitivity 
SMA connector 
2-way full-duplex communication through adaptive TDM 
UART interface 
Transparent serial link 
MAVLink protocol framing 
Frequency Hopping Spread Spectrum (FHSS) 
Configurable duty cycle 
Error correction corrects up to 25% of bit errors 
Open-source SIK firmware 
Configurable through Mission Planner and APM Planner 
Supply voltage: 3.7-6 VDC (from USB or DF13 connector) 
Transmit current: 100 mA at 20 dBm 
Receive current: 25 mA 
Serial interface: 3.3 V UART 
Dimensions:26mm*19mm 
 
This Radio Telemetry kit offers a great low price, longer range (approx one mile with supplied antennas) and superior performance. The system utilizes 433Mhz (or 915Mhz) band and provides a full-duplex link using HopeRF's HM-TRP modules running custom, open source, firmware.

The SiK firmware includes a bootloader that permits radio firmware upgrades over the serial interface, and configuration of system parameters. Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.

Interface to the module is via standard 5V-tolerant TTL serial / FT230 USB serial.

Kick your mission planning into real time with Radios, featuring interchangeable air and ground modules, Android tablet compatibility, and protective cases. Radios allow your ground station computer to communicate with your vehicle wirelessly, providing unparalleled ease of use for viewing in-flight data, changing missions on the fly, and tuning.915MHz and 433MHz available. 

Package Includes:



Micro radio telemetry module *1 
Ground radio telemetry module 
JST 1mm 6pin cable *1(for micro APM) 



Maybe You Also Like...
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$92.00
KakuteF7 HDV AIO
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$42.00
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$49.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00
Pixhawk 4 GPS Module
SALE
Pixhawk 4 GPS Module with JST GH 10 Pin connector for Pixhawk 4 "GPS Module" input port
$42.00 $42.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Pix32"Pixhawk" Flight Controller
This board is based on the Pixhawk project FMUv2 open hardware design. It is also know as Pixhawk 2,with hardware version px4 2.4.6.
$129.00