HomeHome > Flight Controllers > Pixhawk1(Pix32)

Pix32"Pixhawk" Flight Controller

Item Code:
11011
This board is based on the Pixhawk project FMUv2 open hardware design. It is also know as Pixhawk 2,with hardware version px4 2.4.6.
Unit Price:
USD $129.00
Price:
USD
$129.00
Shipping Cost:
to
Units
490 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service

This board is based on the Pixhawk project FMUv2 open hardware design. It is also know as Pixhawk 2,with hardware version px4 2.4.6.

Features:

Advanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS 
Abundant connectivity options for additional peripherals (UART, I2C, CAN) 
Redundant power supply inputs and automatic failover 
External safety button for easy motor activation 
Multicolor LED indicator 
High-power, multi-tone piezo audio indicator 
microSD card for long-time high-rate logging 
14 PWM / Servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible) 
Integrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply (fixed-wing use) 
Backup system integrates mixing, providing consistent autopilot and manual override mixing modes (fixed wing use) 
 
Pix32 is an advanced autopilot system designed by the PX4 open-hardware project. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.

The benefits of the Pix32 system include integrated multi-threading, a Unix/Linux-like programming environment, completely new autopilot functions such as Lua scripting of missions and flight behavior, and a custom PX4 driver layer ensuring tight timing across all processes. These advanced capabilities ensure that there are no limitations to your autonomous vehicle. The Pix32 allows existing APM and PX4 operators to seamlessly transition to this system and lowers the barriers to entry for new users to participate in the exciting world of autonomous vehicles.

The flagship Pix32 module will be accompanied by new peripheral options, including a digital airspeed sensor, support for an external multi-color LED indicator and an external magnetometer. All peripherals are automatically detected and configured.

Package Includes:

Pix32 autopilot 
Buzzer 
Power module with XT60 connectors and 6-position connector cable 
Extra 6-position cable 
Micro USB cable 
SD card and USB adapter 
3-wire servo cable 
Safety switch*1 


Maybe You Also Like...
Kopis cinewhoop_2.5inch(free shipping)
NEW
Caddx Nebula Vista Kit 720p/120fps low latency HD digital FPV system / T-Motor: F1404 KV3800 / GEMFAN D63-5B / Take-off Weight:248g
$144.00
Tekko32 F3 4IN1 Mini 35A ESC(35A)
NEW
BLHELI32 / F3 MCU/4x 35A/20x20mm
$43.00
H-RTK F9P GNSS Series
NEW
Differential high-precision multi-band GNSS positioning system series. UBLOX F9P module
$378.00
H-RTK M8P GNSS Series
NEW
H-RTK M8P is the latest differential high-precision GNSS positioning system from Holybro. It uses a UBLOX M8P module.
$199.00
Pix32 v5
HolyBro Pix32 v5 is a new flight controller we have developed on the base of FMUv5 scheme, which can be regarded as a variant version of ‘Pixhawk4’.
$143.00
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module.
$92.00
KakuteF7 HDV AIO
Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module.
$42.00
X500 Kit
X500 Frame full carbon fiber twill,ARM diamete16mm, It is  perfectly compatible with the Holybro Pixhawk4 and Pixhawk4 Mini kits.The kit is easy to assemble.No soldering needed.
$425.00