HomeHome > Flight Controllers > Pixhawk 4

Pixhawk 4(beta launch)

Item Code:
20034
Sold: 74
Unit Price:
USD $211.00
(0% OFF)
Price:
USD
$211.00
(0% OFF)
  • Optional items:
    Pixhawk 4(plastic case)&GPS (UBLOX NEO-M8N)&PM07 Pixhawk 4(aluminum case)&GPS (UBLOX NEO-M8N)&PM07
Shipping Cost:
to
Delivery:
Estimated between
Units
74 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service

Product features
- A new and small form factor
- More computing power and 2X the RAM than previous versions
- New sensors with higher temperature stability
- Integrated vibrations isolation
- Increased ease-of-use: pre-installed with most recent PX4 (v1.7)
- Additional ports for better integration and expansion


Product description
Pixhawk ® 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and the PX4 team, optimized to run the full Dronecode stack and comes preinstalled with the latest PX4 firmware (v1.7).
It features the currently most advanced processor technology from ST Microelectronics ® , sensor technology from Bosch ® , InvenSense ® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.
The Pixwhawk 4’s microcontroller now has a 2 MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.
High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot,permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.
The two external SPI buses and six associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS/Compass modules.
The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs,startups, and for academics (research, professors, students).


Technical specifications
● Main FMU Processor: STM32F765
    ○ 32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM
● IO Processor: STM32F100
    ○ 32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM
● On-board sensors
    ○  Accel/Gyro: ICM-20689
    ○  Accel/Gyro: BMI055
    ○  Mag: IST8310
    ○  Barometer: MS5611
● GPS: ublox Neo-M8N GPS/GLONASS receiver; integrated magnetometer IST8310


Interfaces
● 8-16 PWM servo outputs (8 from IO, 8 from FMU)
● 3 dedicated PWM/Capture inputs on FMU
● Dedicated R/C input for CPPM
● Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input
● Dedicated S.Bus servo output
● 5 general purpose serial ports
   ○ 2 with full flow control
   ○ 1 with separate 1.5A current limit
● 3 I2C ports
● 4 SPI buses
   ○ 1 internal high speed SPI sensor bus with 4 chip selects and 6 DRDYs
   ○ 1 internal low noise SPI bus dedicated for Barometer with 2 chip selects, no DRDYs
   ○ 1 internal SPI bus dedicated for FRAM
   ○ Supports dedicated SPI calibration EEPROM located on sensor module
   ○ 1 external SPI buses
● Up to 2 CANBuses for dual CAN with serial ESC
   ○ Each CANBus has individual silent controls or ESC RX-MUX control
● Analog inputs for voltage / current of 2 batteries
● 2 additional analog inputs

Electrical data
Voltage Ratings:
● Power module output: 4.9~5.5V
● Max input voltage: 6V
● Max current sensing: 120A
● USB Power Input: 4.75~5.25V
● Servo Rail Input: 0~36V

Mechanical data
● Dimensions: 44x84x12mm
● Weight: 15.8g

Environmental data, quality & reliability
● Operating temp. ~40~85C
● Storage temp. -40~85C
● CE
● FCC
● RoHS compliant (lead-free)


Package Included 
Pixhawk4 *1
Pixhawk4 GPS MODULE *1
Pixhawk 4 Power Management Board *1
I2C splitter Board *1
6 to 6 pin cable (power) *3
4 to 4 pin cable (CAN) *2
6 to 4 pin cable (Data) *1
10 to 10 pin cable (PWM) *2
8 to 8 pin cable(AUX) *1
PPM/SBUS out cable *1
XSR receiver cable *1
DSMX receiver cable *1
SBUS receiver cable *1
USB cable *1
'X'type folding pedestal mount  *1
70mm & 140mm carbon rod stand off *2
6*3 2.54mm pitch Horizontal Pin *1
8*3 2.54mm pitch Horizontal Pin *1
Foam Set *1
Pixhawk4 Quick Start Guide *1
GPS Quick Start Guide *1
Power Management Board Quick Start Guide *1 


Some Tips:
https://docs.px4.io/en/flight_controller/pixhawk4.html

Downloads:
Pixhawk4 Quick Start Guide
Pixhawk4 GPS Quick Start Guide
PM07 Quick Start Guide

Pixhawk4 DataSheet
Pixhawk4 Pinouts

 

Average rating:



Maybe You Also Like...
Pixhawk 4(beta launch)
SALE
NEW
$211.00 $211.00
FPV Frame-Kopis 1
NEW
Kopis 1 FPV Racing Drones Spare Part
$49.00
Kopis 1
KOPIS is a high-performance ready-to-fly FPV racing drone from Holybro, Low-deck design means centralized mass and excellent handling.
$288.00
Kakute F4 All-In-One V2
NEW
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
LED Board-Kopis 1
NEW
Kopis 1 FPV Racing Drones Spare Part
$11.00
Kakute F4 V2
NEW
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
NEW
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
$104.00
Holybro Tekko 32 4in1 esc (BLHeli 32)
NEW
Powerful 4in1 ESC with BLHELI32 firmware natively supports ESC Telemetry function.
$56.00
Holybro Tekko32 35A ESC
NEW
Tekko32 is the latest BLHeli32 ESC from HolyBro Hobby, premium class product.
$16.99
MOTOR Air40 kv2450-Kopis 1
NEW
Kopis 1 FPV Racing Drones Spare Part
$13.98
Shuriken 180 Pro
The Shuriken 180pro,the advanced version of Shuriken 180, is an Almost Ready to Fly (ARF) quad from Holybro.
$99.00
Kakute F4
Kakute F4 Flight Controller With Betaflight OSD
$36.00