HomeHome > ESC > Tekko32 F3

Tekko32 F3 4in1 mini ESC(45A)

Item Code:
31020
BLHELI32 / F3 MCU/4x 45A The New BLHELI32 ESC adapted the F3 MCU, which will provide a smoother control and faster response speed, 4x 45A F3 BLHELI32 ESC in 20x20 standard .
Unit Price:
USD $56.00
Price:
USD
$56.00
Shipping Cost:
to
Delivery:
Estimated between
PC
1 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service

The latest Tekko32 F3 4in1 mini ESC has got some improvements on its performance

1) Enhanced BEC, withstand voltage up to 80V.
2)The first blheli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience.
3) The mounting hole has been changed into m3 with anti-vibration silicone grommet Insert.

4) Additional soldering pad(s) available. (see pin map below)
5) 
Amperage meter scale ratio has been adjusted to 185.

BLHELI32 / F3 MCU/4x 45A

The New BLHELI32 ESC adapted the F3 MCU, which will provide a smoother control and faster response speed, 
4x 45A F3 BLHELI32 ESC in 20x20 standard .
 

SPEC:

  • F3 MCU, runs double faster than F051
  • 32bit ESC with BLHELI32 firmware
  • Supports 3-6S lipo input
  • PWM input, TLM supported
  • Voltage output (VBAT)
  • NO BEC
  • Supports oneshot / Multishot / Dshot PWM
  • Supports damped light
  • Ext. cap needed for 6s (1000uf 35v for 6s usage.)
  • Mounting holes M3, 20x20mm
  • Size:30 x 38 mm
  • Weight: 7.6g

PIN MAP:

 

Package included:

Tekko32 F3 4in1 45A mini ESC *1
M2 Anti-Vibration Silicone Grommet Insert *4
Electrolytic capacito: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1

Some Tips:

Maybe You Also Like...
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$92.00
KakuteF7 HDV AIO
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$42.00
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$49.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00
Pixhawk 4 GPS Module
SALE
Pixhawk 4 GPS Module with JST GH 10 Pin connector for Pixhawk 4 "GPS Module" input port
$42.00 $42.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Pix32"Pixhawk" Flight Controller
This board is based on the Pixhawk project FMUv2 open hardware design. It is also know as Pixhawk 2,with hardware version px4 2.4.6.
$129.00