HomeHome > ESC > Tekko32 F3

Tekko32F3 Metal 4in1 ESC(65A)

Item Code:
31019
Sold: 31
BLHELI32 / Onboard analog current sensor / F3 MCU The New BLHELI32 ESC adapted the F3 MCU, which will provide a smoother control and faster response speed, along with a Metal case mosfet that increases Heat dissipation.
Unit Price:
USD $75.00
Price:
USD
$75.00
Shipping Cost:
to
Delivery:
Estimated between
PC
69 in Stock
  • Product Details
  • Reviews(3)
  • Write a Comment
  • After-sales Service

Tekko32F3 Metal 4in1 ESC(65A)

BLHELI32 / Onboard analog current sensor / F3 MCU
The New BLHELI32 ESC adapted the F3 MCU, which will provide a smoother control and faster response speed, along with a Metal case mosfet that increases Heat dissipation.
 
The latest Tekko32F3 Metal 4in1 ESC has made various improvements on its performance compared to the previous version:
1) Better optimized power path, providing a more stable performance.
2) Doubled capacity of on-board capacitors, now capable of 2068uf.
3) Amperage meter scale ratio has been adjusted to 168.
4) Added 3 fault detection indicators to indicate faults better.
5) Enhanced and more robust Lipo input pad for soldering.
6) PCB with 3oz copper design, capable of handling bigger current, and better heat dissipation capacity.
7) The PCB design uses a design in which the drive circuit and the control circuit are separated. This design broadens the overcurrent capability of the drive circuit, and at the same time reduces the electrical interference to the control circuit.

SPEC:

  • F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz
  • The 4in1 has onboard analog current sensor, and TLM function(then no current reading over TLM)
  • Using metal case mosfet for better Heat dissipation
  • Supports Lipo 4-6S
  • Ext. cap needed for 6s (1000uf 35v for 6s usage.)
  • Size:43 x 44mm
  • Mounting holes:30.5x30.5mm
  • Weight: 15.8g

Notice:
The air flow is very import if you want to run this 4in1 in high current.
The input cable(from Lipo to 4in1), should be good soldered, and at least 12AWG

Package included:

Tekko32 F3 Metal 4in1 ESC *1
M3 Anti-Vibration Silicone Grommet Insert *4
Electrolytic capacito: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1

 

PIN MAP:

Some Tips:

Recent Reviews
  • ByFPV Master
  • Sep 19, 2019
Great product

  • ByAron
  • Aug 21, 2019
Perfect product ,really happy with it!

  • ByBuy at your own risk
  • Jul 09, 2019
Unfortunately, in spite of the great specs, this 4in1 is inherently flawed, is easily broken, and Holybro is happy blaming you for anything that may or may not happen to your components, so expect no accountability on their part.

I, along with a growing number of others (check around for other reviews), have had the battery pads lift off of the board with little to no effort. Its a flat pad laminated to the board with some sort of adhesive, which isnt strong enough for the task. The only thing keeping your EXPENSIVE 4in1 from being a paper weight, is a tiny film of glue and a trace, which pop off if you look at it funny. Most 4in1s have a through hole at the pad or some sort of way to provide a mechanical hold after youve soldered the pigtail on, to prevent this problem, but not with this one. For $70+ bucks that's completely unacceptable considering Ive had 4in1's almost half as expensive take beating after beating without issue.

I dont solder for a living, but I've had tiny whoop fc that were more durable, and Ive never burned or lifted a pad on one of them, or on any of the other 5in quads etc I've built, now all of the sudden, according to Holybro, I forgot how to solder lol ok... $400 worth of stuff from them in the last month or two, and not another red cent ever again.

Buy at your own risk...

Maybe You Also Like...
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
KakuteF7 HDV AIO
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$42.00
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$49.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00
Kakute F7 mini V2
B+ pad available on KakuteF7 mini V2, with IMU upgraded into MPU6000
$33.00
Pixhawk 4 GPS Module
SALE
Pixhawk4 GPS
$42.00 $42.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00