HomeHome > Video Link > Taisync

ViULinx_Lite

Item Code:
13010
Sold: 2
Unit Price:
USD $990.00
Price:
USD
$990.00
Shipping Cost:
to
Delivery:
Estimated between
set
8 in Stock
  • Product Details
  • Reviews(0)
  • Write a Comment
  • After-sales Service

Parameters

Frequency 2.4GHz-2.483GHz
Band width 2.5MHz (uplink), 10MHz(downlink)
Power 27dBm (FCC), 20dBm (CE)
Video format 720p@30fps, 720p@60fps, 1080p@30fps, 1080p@60fps
Modulation OFDM
Constellation BPSK, QPSK, 16QAM
FEC LDPC (1/2, 2/3, 3/4, 5/6)
Duplex TDD
Downlink throughput 2.3Mbps ~ 12Mbps
Uplink throughput 115.2kbps
Encryption AES 128, AES 256
Interface HDMI, USB, Serial, PPM/S.BUS
Video compression H.264/H.265
Glass to glass latency <300ms (Camera dependent)
Dimension 122.7X52.3X25.1 (Ground unit)
77.8X47.3X23.5mm (Air unit)
Weight 97g(air unit)
Rated voltage/current DC12V/1.2A (or 3S lithium battery)
Working temperature -20°C ~55°C


Use ViULinx Lite System

1. Connect antennas to RF ports of the air unit.
2. Connect camera HDMI output to HDMI port of the air unit.
3. Connect the PPM/S.bus port of the flight controller to the RC port of the air unit.
4. Connect the flight controller telemetry port to the serial port of the air unit.
5. Turn on the camera and set the video format to 720p or 1080p.
6. Connect a 12V DC power to the power port of the air unit and turn on the power.
7. If latest firmware is desired, connect the air unit to a PC or a Laptop using USB cable and run ViuLinxTM PC program to upgrade the firmware of the air unit to the latest one.





1. Connect antennas to RF ports of the ground unit.
2. Adjust the remote controller to the training mode, if PPM mode is used, the remote controller interface at the ground end is connected to the training port of the remote control. If S.BUS mode is used, the cable connection between the S.BUS receiver and the ground end need to be established, and the connection between the receiver and the remote control need to be established.
3. Connect the USB port of ground control station to the serial port of the ground unit with TTL-USB cable if you want to use ViuLinx’s telemetry link.
4. Connect cell phone or tablet to the USB port of the ground unit.
5. If video view on a monitor is desired, connect a monitor to the HMDI port of the ground unit.
6. Turn on the ground unit.
7. If latest firmware is desired, connect the ground unit to a PC or a Laptop using USB cable and run ViULinxTM PC program to upgrade the firmware of the air unit to the latest one.
8. After downlink and uplink are connected, both LEDs will be on.
9. Run ViuLinxTM APP on your phone or tablet. QGC is also supported. You can watch the video on phone or tablet with ViuLinxTM or QGC APP.





Package Contents

Air Unit & Ground Unit

     

Air unit antenna × 2
Ground unit antenna× 2

Air Unit Cables
   Power cable x1
   HDMI cable (Micro to Micro) ×1
   RC cable x1
   Serial cable (UART) x1
   USB cable(Micro to Type-A)×1

Ground Unit Cables
   Power cable x1
   HDMI cable (Type C-Type A) ×1
   RC cable x1
   Serial cable (UART) x1
   USB cable (Micro to Type-A)×1


Manual:
User_Manual_ViULinx_Lite_V1.00.pdf

Average rating:

Maybe You Also Like...
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
NEW
Kakute F7 V1.5& ATLATL HV V2 & Tekko 32 F3 4in1 40A ESC Combo
$125.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
Pixhawk 4
SALE
NEW
$170.00 $170.00
Kakute F7 V1.5 Stack
IMU updated to MPU6000,Re-designed and more reliable damping structure
$69.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2 & ATLATL HV V2 & Tekko32 4in1 esc (BLHeli 32) Combo
Kakute F4 V2 & ATLATL HV V2 & Tekko 32 4in1 esc (BLHeli 32) Combo
$105.00
Holybro Tekko32 4in1 esc (35A)
Powerful 4in1 ESC with BLHELI32 firmware natively supports ESC Telemetry function.
$56.00
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
Kakute F4 AIO V2 & Tekko32 35A ESC * 4 Combo
$104.00
Holybro Tekko32 ESC(35A)
Tekko32 is the latest BLHeli32 ESC from HolyBro Hobby, premium class product.
$16.99