HomeHome > Multicopter kit

X500 Kit

Item Code:
30052,30053,30054,30055
X500 Frame full carbon fiber twill,ARM diamete16mm, It is  perfectly compatible with the Holybro Pixhawk4 and Pixhawk4 Mini kits.The kit is easy to assemble.No soldering needed.
Unit Price:
USD $425.00
Price:
USD
$425.00
  • Optional items:
    X500 Kit-Pixhawk 4 Mini_ 433MHz X500 Kit-Pixhawk 4 Mini_ 915MHz X500 Kit-Pixhawk 4_ 433MHz X500 Kit-Pixhawk 4_ 915MHz
Shipping Cost:
to
Delivery:
Estimated between
set
316 in Stock
  • Product Details
  • Write a Comment(0)
  • After-sales Service

Product Description

X500 Frame full carbon fiber twill,The 2mm thick carbon fiber bottom plate supports a PM board with 30.5 mm or 45 mm mounting holes. It is  perfectly compatible with the Holybro Pixhawk4 and Pixhawk4 Mini kits.The kit is easy to assemble.No soldering needed.
 

X500 Kit-Pixhawk4

Kit Contents

  • Pixhawk 4 autopilot
  • Power Management PM07
  • Pixhawk4 GPS
  • Motors - 2216 KV880
  • Propeller 1045
  • 433MHz Telemetry Radio / 915MHz Telemetry Radio
  • Power and Radio Cables
  • Battery Straps
  • Dimensions:410*410*300mm
  • Wheelbase:500mm
  • Weight:978g

Note: No LiPo battery included.


X500 Kit-Pixhawk4 mini

Kit Contents

  • Pixhawk 4 mini autopilot

  • Power Management PM06

  • Pixhawk4 GPS

  • Motors - 2216 KV880

  • Propeller 1045

  • 433MHz Telemetry Radio / 915MHz Telemetry Radio

  • Power and Radio Cables

  • Battery Straps

  • Dimensions:410*410*300mm

  • Wheelbase:500mm

  • Weight:955g

Note: No LiPo battery included.

Recommended Battery Specification: 4S 5000mAh Lipo
Max payload: up to 2.1kg (4S 5000 mAh battery)

Manual:

X500 Frame Kit Assembly Guide
X500-Kit_AssemblyManual

 

Maybe You Also Like...
Durandal
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
$205.00
Pixhawk4 mini
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
$139.00
Pixhawk 4
SALE
Pixhawk​®​ 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.
$170.00 $170.00
Kakute F7 HDV Stacks
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$92.00
KakuteF7 HDV AIO
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$42.00
Kakute F7 AIO V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$49.00
Kakute F7 V1.5
IMU updated to MPU6000,Re-designed and more reliable damping structure
$45.00
KakuteF7 HDV
Holybro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
$38.00
Pixhawk 4 GPS Module
SALE
Pixhawk 4 GPS Module with JST GH 10 Pin connector for Pixhawk 4 "GPS Module" input port
$42.00 $42.00
Kakute F4 All-In-One V2
The Holybro Kakute F4 AIO All-In-One flight controller makes it easy to build your multirotor.
$40.00
Kakute F4 V2
The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot.
$36.00
Pix32"Pixhawk" Flight Controller
This board is based on the Pixhawk project FMUv2 open hardware design. It is also know as Pixhawk 2,with hardware version px4 2.4.6.
$129.00